features ? high speed-1 mbit/s superior cmr-10 kv/s dual-channel hcpl-2530/hcpl-2531 double working voltage-480v rms ctr guaranteed 0-70c u.l. recognized (file # e90700) high speed transistor optocouplers description the hcpl-4502/hcpl-2503, 6n135/6 and hcpl-2530/hcpl-2531 optocouplers consist of an algaas led optically coupled to a high speed photodetector transistor. a separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. an internal noise shield provides superior common mode rejection of 10kv/s. an improved package allows superior insulation permitting a 480 v working voltage compared to industry standard 0f 220 v. applications line receivers pulse transformer replacement output interface to cmos-lsttl-ttl wide bandwidth analog coupling parameter symbol value units storage temperature t stg -55 to +125 c operating temperature t opr -55 to +100 c lead solder temperature t sol 260 for 10 sec c emitter dc/average forward input current each channel (note 1) i f (avg) 25 ma peak forward input current (50% duty cycle, 1 ms p.w.) i f (pk) 50 ma each channel (note 2) peak transient input current - ( !" 1 s p.w., 300 pps ) i f (trans) 1.0 a each channel reverse input voltage each channel v r 5v input power dissipation (6n135/6n136 and hcpl-2503/4502) p d 100 mw (hcpl-2530/2531 ) each channel (note 3) 45 detector average output current each channel i o (avg) 8 ma peak output current each channel i o (pk) 16 ma emitter-base reverse voltage (6n135, 6n136 and hcpl-2503 only) v ebr 5v supply voltage v cc -0.5 to 30 v output voltage v o -0.5 to 20 v base current (6n135, 6n136 and hcpl-2503 only) i b 5ma output power (6n135, 6n136, hcpl-2503, hcpl-4502) (note 4) p d 100 mw dissipation (hcpl-2530, hcpl-2531) each channel 35 mw absolute maximum ratings (t a = 25c unless otherwise specified) 1 2 3 4 5 6 7 8 + _ v f1 v cc v 01 v 02 gnd v f2 _ + hcpl-2530/hcpl-2531 1 2 3 4 5 6 7 8 + _ v f v cc v b v o gnd n/c n/c 6n135, 6n136, hcpl-2503, hcpl-4502 pin 7 is not connected in part number hcpl-4502 8 1 8 1 8 1 single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502 200004a
electrical characteristics (t a = 0 to 70 c unless otherwise specified) 200004a parameter test conditions symbol device min typ** max unit emitter (i f = 16 ma, t a =25 c) v f 1.45 1.7 v input forward voltage (i f = 16 ma) 1.8 input reverse breakdown voltage (i r = 10 ?) b vr 5.0 v temperature coefficient of forward voltage (i f = 16 ma) ( # v f / # t a ) -1.6 mv/ c detector (i f = 0 ma, v o = v cc = 5.5 v) all 0.001 0.5 (t a =25 c) logic high output current i oh 6n135 ? (i f = 0 ma, v o = v cc = 15 v) 6n136 0.005 1 (t a =25 c) hcpl-4502 hcpl-2503 (i f = 0 ma, v o = v cc = 15 v) all 50 6n135 (i f = 16 ma, v o = open) 6n136 120 200 logic low supply current (v cc = 15 v) i ccl hcpl-4502 ? hcpl-2503 (i f1 = i f2 = 16 ma, v o = open) hcpl-2530 200 400 (v cc = 15 v) hcpl-2531 6n135 (i f = 0 ma, v o = open, v cc = 15 v) 6n136 1 (t a =25 c) hcpl-4502 hcpl-2503 i cch 6n135 logic high supply current (i f = 0 ma, v o = open) 6n136 2 ? (v cc = 15 v) hcpl-4502 hcpl-2503 (i f = 0 ma, v o = open) hcpl-2530 0.02 4 (v cc = 15 v) hcpl-2531 individual component characteristics high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502 ** all typicals at t a = 25 c
parameter test conditions symbol device min typ** max unit coupled 6n135 71850% (i f = 16 ma, v o = 0.4 v) hcpl-2530 (v cc = 4.5 v, t a =25 c) 6n136 hcpl-4502 19 27 50 % hcpl-2531 current transfer ratio ctr hcpl-2503 12 27 % (note 5) 6n135 521 % hcpl-2530 (i f = 16 ma, v o = 0.5 v) 6n136 (v cc = 4.5 v) hcpl-4502 15 30 % hcpl-2531 hcpl-2503 9 30 % (i f = 16 ma, i o = 1.1 ma) 6n135 0.18 0.4 (v cc = 4.5 v, t a =25 c) hcpl-2530 0.18 0.5 6n136 (i f = 16 ma, i o = 3 ma) hcpl-4502 0.25 0.4 (v cc = 4.5 v, t a =25 c) hcpl-2503 logic low output voltage v ol hcpl-2531 0.25 0.5 v output voltage (i f = 16 ma, i o = 0.8 ma) 6n135 0.5 (v cc = 4.5 v) hcpl-2530 6n136 (i f = 16 ma, i o = 2.4 ma) hcpl-4502 0.5 (v cc = 4.5 v) hcpl-2503 hcpl-2531 200004a transfer characteristics (t a = 0 to 70 c unless otherwise specified) high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502 ** all typicals at t a = 25 c
200004a parameter test conditions symbol device min typ** max unit t a = 25 c, (r l = 4.1 k $ , i f = 16 ma) (note 6) (fig. 7) 6n135 0.45 1.5 s hcpl-2530 6n136 (r l = 1.9 k $ , i f = 16 ma) (note 7) (fig. 7) hcpl-4502 0.45 0.8 s propagation delay t a = 25 c hcpl-2503 time to logic low t phl hcpl-2531 (r l = 4.1 k $ , i f = 16 ma) (note 6) (fig. 7) 6n135 2.0 s hcpl-2530 6n136 (r l = 1.9 k $ , i f = 16 ma) (note 7) (fig. 7) hcpl-4502 1.0 s hcpl-2503 hcpl-2531 t a = 25 c, (r l = 4.1 k $ , i f = 16 ma) (note 6) (fig. 7) 6n135 0.5 1.5 s hcpl-2530 6n136 (r l = 1.9 k $ , i f = 16 ma) (note 7) (fig. 7) hcpl-4502 0.3 0.8 s t a = 25 c hcpl-2503 propagation delay t plh hcpl-2531 time to logic high (r l = 4.1 k $ , i f = 16 ma) (note 6) (fig. 7) 6n135 2.0 s hcpl-2530 6n136 (r l = 1.9 k $ , i f = 16 ma) (note 7) (fig. 7) hcpl-4502 1.0 s hcpl-2503 hcpl-2531 (i f = 0 ma, v cm = 10 v p-p ,r l = 4.1 k $ ) 6n135 10,000 v/ s common mode (note 8) (fig. 8) t a = 25 c hcpl-2530 transient (i f = 0 ma, v cm = 10 v p-p ) |cm h | 6n136 immunity at t a = 25 c, (r l = 1.9 k $ ) hcpl-4502 10,000 v/ s logic high (note 8) (fig. 8) hcpl-2503 hcpl-2531 (i f = 16 ma, v cm = 10 v p-p ,r l = 4.1 k $ ) 6n135 10,000 v/ s common mode (note 8) (fig. 8) t a = 25 c hcpl-2530 transient (i f = 16 ma, v cm = 10 v p-p ) |cm l | 6n136 immunity at (r l = 1.9 k $ ) hcpl-4502 10,000 v/ s logic low (note 8) (fig. 8) hcpl-2503 hcpl-2531 switching characteristics (t a = 0 to 70 c unless otherwise specified., v cc = 5 v) high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502 ** all typicals at t a = 25 c
200004a high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502 1. derate linearly above 70 c free-air temperature at a rate of 0.8 ma/ c. 2. derate linearly above 70 c free-air temperature at a rate of 1.6 ma/ c. 3. derate linearly above 70 c free-air temperature at a rate of 0.9 mw/ c. 4. derate linearly above 70 c free-air temperature at a rate of 2.0 mw/ c. 5. current transfer ratio is defined as a ratio of output collector current, i o , to the forward led input current, i f , times 100%. 6. the 4.1 k $" load represents 1 lsttl unit load of 0.36 ma and 6.1k $" pull-up resistor. 7. the 1.9 k $" load represents 1 ttl unit load of 1.6 ma and 5.6 k $" pull-up resistor. 8. common mode transient immunity in logic high level is the maximum tolerable (positive) dv cm /dt on the leading edge of the common mode pulse signal v cm , to assure that the output will remain in a logic high state (i.e., v o % 2.0 v). common mode transient immunity in logic low level is the maximum tolerable (negative) dv cm /dt on the trailing edge of the common mode pulse signal, v cm , to assure that the output will remain in a logic low state (i.e., v o & 0.8 v). 9. device is considered a two terminal device: pins 1, 2, 3 and 4 are shorted together and pins 5, 6, 7 and 8 are shorted togeth er. 10. measured between pins 1 and 2 shorted together, and pins 3 and 4 shorted together. notes characteristics test conditions symbol min typ** max unit (relative humidity = 45%) input-output (t a = 25 c, t = 5 s) i i-o 1.0 a insulation leakage current (v i-o = 3000 vdc) (note 9) withstand insulation test voltage (rh ! 50%, t a = 25 c) v iso 2500 v rms (note 9) ( t = 1 min.) resistance (input to output) (note 9) (v i-o = 500 vdc) r i-o 10 12 $ capacitance (input to output) (note 9) (f = 1 mhz) c i-o 0.6 pf dc current gain (i o = 3 ma, v o = 5 v) hfe 150 input-input (rh ! 45%, v i-i = 500 vdc) (note 10) i i-i 0.005 a insulation leakage current t = 5 s, (hcpl-2530/2531 only) input-input resistance (v i-i = 500 vdc) (note 10) r i-i 10 11 $ (hcpl-2530/2531 only) input-input capacitance (f = 1 mhz) (note 10) c i-i 0.03 pf (hcpl-2530/2531 only) isolation characteristics (t a = 0 to 70 c unless otherwise specified) ** all typicals at t a = 25 c
200004a fig. 1 normalized ctr vs. forward current i f - forward current (ma) 0.1 1 10 100 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 fig. 2 normalized ctr vs. temperature t a - temperature (?c) -60 -40 -20 0 20 40 60 80 100 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 fig. 3 output current vs. output voltage v o - output voltage (v) 02468101214161820 i o - output current (ma) 0 2 4 6 8 10 12 14 16 i f = 5 ma i f = 10 ma i f = 15 ma i f = 20 ma i f = 25 ma i f = 30 ma i f = 35 ma i f = 40 ma normalized to: i f = 16 ma v o = 0.4 v v cc = 5 v t a = 25?c normalized to: t a = 25?c i f = 16ma v cc = 5 v v o = 0.4 v fig. 4 logic high output current vs. temperature t a - temperature (?c) -60 -40 -20 0 20 40 60 80 100 i o h - logic high output current (na) 0.1 1 10 100 1000 fig. 5 propagation delay vs. temperature t a - temperature (?c) -60 -40 -20 0 20 40 60 80 100 t p - pr op a g a t ion dela y (ns) 0 100 200 300 400 500 600 700 800 r l = 1.9 k (tphl) r = 4.1 k (tplh) l r l = 1.9 k (tplh) r l = 4.1 k (tplh) fig. 6 propagation delay vs. load resistance r l = load resistance (k $ ) 1 10 t p - pr op a g a t ion dela y (ns) 100 1000 10000 i f - 16 ma (tphl) i f - 10 ma (tphl) i f - 10 ma (tplh) i f - 16 ma (tplh) t a = 25?c v cc = 5 v i f = 0 ma v cc = 5 v v o = 5 v i f = 16 ma v cc = 5 v v cc = 5 v t a = 25?c high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502
pulse gen cm v v ff b a +- +5 v o v - i f 3 4 + f v - 2 1 shield noise 6 o 5 gnd 7 8 v b v cc v l r plh ol v v o 0 5 v 1.5 v f i 1.5 v t phl t switch at a : i = 0 ma f switch at a : i = 16 ma f t r v o o v ol v 5 v 0 v 10% 10% 90% cm v 10 v 4 5 noise 1 2 3 shield 8 7 6 +5 v o v v cc v 01 v 02 gnd v f1 - + f2 v - f i + 10% duty cycle i/f < 100 s f i monitor l r c = 1.5 f l pulse generator tr = 5ns z = 50 o $ gnd + 4 5 1 3 2 - f2 v v f1 - shield noise +5 v cc 8 v l v 6 02 v 7 r 01 v o v cm a b pulse gen f i +- + 3 i monitor f 4 i/ < 100 s 10% d.c. tr = 5ns generator pulse z = 50 f o + v f i ' $ f - 2 1 shield noise v o o 6 5 gnd 7 8 v b v l r cc v +5 v 0.1 f l c = 1.5 f test circuit for 6n135, 6n136, hcpl-2503 and hcpl- 4502 0.1 f test circuit for hcpl-2530 and hcpl-2531 test circuit for 6n135, 6n136, hcpl-2503 and hcpl-4502 test circuit for hcpl-2530 and hcpl-2531 f t 0.1 f 0.1 f ff v m r m r 90% fig. 8 common mode immunity test circuit fig. 7 switching time test circuit 200004a high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502
note all dimensions are in inches (millimeters) 200004a package dimensions (surface mount) lead coplanarity : 0.004 (0.10) max 0.270 (6.86) 0.250 (6.35) 0.390 (9.91) 0.370 (9.40) 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) typ 0.020 (0.51) min 0.070 (1.78) 0.045 (1.14) 0.300 (7.62) typ 0.405 (10.30) min 0.315 (8.00) min 0.045 [1.14] 32 1 4 5678 pin 1 id. 0.016 (0.41) 0.008 (0.20) package dimensions (through hole) 0.200 (5.08) 0.115 (2.92) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.020 (0.51) min 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) pin 1 id. 3 0.070 (1.78) 0.045 (1.14) 2 41 56 78 0.300 (7.62) typ 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 15?max seat ing pl ane package dimensions (0.4?lead spacing) 0.200 (5.08) 0.115 (2.92) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.004 (0.10) min 0.390 (9.91) 0.370 (9.40) 0.270 (6.86) 0.250 (6.35) 3 0.070 (1.78) 0.045 (1.14) 2 41 56 78 0.400 (10.16) typ 0.154 (3.90) 0.120 (3.05) 0.016 (0.40) 0.008 (0.20) 0?to15 pin 1 id. seating pl ane high speed transistor optocouplers single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502
corporate headquarters north american sales european sales qt optoelectronics qt optoelectronics quality technologies deutschland gmbh 610 north mary avenue 16775 addison rd.,suite 200 max-huber-strasse 8 sunnyvale, ca 94086 addison, tx 75001 d-85737 ismaning, germany (408) 720-1440 phone (972) 447-1300 phone 49 [0] 89/96.30.51 phone (408) 720-0848 fax (972) 447-0784 fax 49 [0] 89/96.54.74 fax european sales asia/pacific sales european sales qt optoelectronics qt optoelectronics quality technologies (u.k) ltd. ?e levant b613, 6th floor 10, prebendal court, oxford road 2, rue du nouveau bercy east wing, wisma tractors aylesbury, buckinghamshire f-94277-charenton-le pont cedex jalan ss16/1, subang jaya hp19-3ey united kingdom france 47500 petaling jaya 44 [0] 1296/30.44.99 phone 33 [0] 1.45.18.78.78 phone selangor darul eshan, malaysia 44 [0] 1296/39.24.32 fax 33 [0] 1.43.75.77.57 fax 603/735-2417 phone 603/736-3382 fax r2 .r2 opto plus reliability conditioning s .s surface mount lead bend sd .sd surface mount; tape and reel sdl .sdl surface mount; tape and reel w .w 0.4?lead spacing order entry option identifier description 4.0 0.1 1.55 0.05 user direction of feed 4.0 0.1 1.75 0.10 7.5 0.1 16.0 0.3 12.0 0.1 0.30 0.05 13.2 0.2 4.90 0.20 0.1 max 10.30 0.20 10.30 0.20 1.6 0.1 qt carrier tape specifications (?d? taping orientation) ordering information high speed transistor optocouplers 200004a single-channel dual-channel 6n135, 6n136 hcpl-2530 hcpl-2503 hcpl-2531 hcpl-4502
life support policy fairchilds products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. a critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. disclaimer fairchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. www.fairchildsemi.com ? 2000 fairchild semiconductor corporation high speed transistor optocouplers
|
